Parts & Accessories
$100.00 - $132.00
Chris King's one piece axles are quickly interchangeable allowing you to easily transfer your Chris King equipped wheels between bicycles.
Includes front and rear wheel locking skewers, seatpost lock, seat collar, and coded key. Prevents removal of your wheels and seatpost from your frame. Protects your wheels and seatpost for a fraction of their replacement cost. Keyed-alike sets can be ordered to protect your other bikes. Also available for solid axle wheels.
Axle conversion kits are required for converting your current hub to be used on various other axle platforms. - Small Diameter (SD) Axle for 15mm forks - Fits Chris King ISO SD Front Hubs (9mm and 15mm only) - Takes existing 9mm QR Chris King ISO Hubs and allows you to run a 15mm Thru Axle - All axles require an adjusting clamp for installation
Includes four locknuts and one coded key for both wheels. Locks both your wheels to your frame. Includes 1 set of M9 and M10 locks.
Includes front and rear wheel locking skewers and coded key. Prevents removal of your wheels from your frame. Protects your wheels for a fraction of their replacement cost. Keyed-alike sets can be ordered to protect your other bikes. Quick release locks use a different key than solid axle locks
Titanium Quick Release Skewer 43.5-44 grams 100mm Front 130mm Rear
Includes two lock nuts and one coded key. Locks one wheel to your frame in 3/8" size for Internal Gear Hubs.
Includes two lock nuts and one coded key. Locks one wheel to your frame in the 10mm sizing.
Includes two lock nuts and one coded key. Locks one wheel to your frame in the 9mm sizing.
- Standard skewers fit either 130 or 135mm spaced hubs, unless listed as another length (i.e. 170mm) - 6061 machined lever with stainless steel pivot and laser-etched logo - All shafts are 5mm in diameter
$15.00 - $40.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
Shimano Nexus and Alfine Internally Geared Hub Cassette Joints - Shimano model # CJ-S700 - Does not include cable fixing bolt unit - OEM cassette joint unit for Alfine SG-S700
Small parts kit for Shimano Alfine & Nexus 8 Speed internally geared hubs.
$22.99 - $31.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Replacement bell crank for Shimano Nexus internally geared hub.
Stan's Cross Country 29er Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Don't let a cracked or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.
$25.00 - $26.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
$21.00 - $26.00
Wheels Manufacturing Inc. replacement sealed hub bearings. High quality machined replacement parts.
Fiberfix Spoke replaces spokes on any wheel. Handy case and instructions are provided. No freewheel removal required. Spoke wrench included. Works on front or rear wheel. Kevlar is stronger than steel. It's perfect for mountain biking and long distance touring.
$15.00 - $22.00
Phil Wood & Co. is credited with pioneering the first modern production sealed bearing cycling components. Our bearings both standard and low drag carbonyte are manufactured for us to our specifications. We specify the race tolerance, surface honing, ball diameter tolerance, bearing material, gap dimensions, and seal specifications. Standard bearings are 100% filled with Phil Waterproof Grease to ensure maximum durability.
Replacement cassette joint unit for Shimano Nexus 4 or 7 speed internally geared hubs.
Cassette joint set for Shimano Nexus/Alfine 8 speed internally geared hub.
$8.25 - $20.00
Enduro bearings are filled with high precision ball bearings for maximum load capacity.
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 9.5mm x 26, rear alloy, steel front hubs - Compatible with 9.5mm x 26tpi axle - Cone Wrench Size: 15mm - Threads: 9.5mm x 26 - Diameter: 17.0mm - Length: 13.8mm - 1 cone per bag COMPATIBLE HUBS: - Fits: JoyTech 9.5mm x 26, rear alloy, steel front hubs - Taiwanese hubs with 9.5mm x 26tpi axle
This outer receiver unit works with the CJ-S700 Cassette Joint Unit for Shimano Alfine SG-S700 internally geared hub. This part can become worn, cracked, or torn, exposing the shift cable and possibly other components to unwanted dirt, water, mud, you name it. You don't want that.
- Replacement part for Surly hubs
- Replacement part for Surly hubs
$11.00 - $15.00
Continental's Easy Tape Rim Strips are 20mm wide and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes they quick and easy to install. Just stretch them over your rims and let them snap in place! Each box contain a pair of rim strips.
$9.00 - $15.00
Replacement pull chain for SRAM and Sachs systems.
Page 1 of 3 Next page