Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Shimano Alfine SG-S700 Outer Receiver Unit
$16.50
This outer receiver unit works with the CJ-S700 Cassette Joint Unit for Shimano Alfine SG-S700 internally geared hub. This part can become worn, cracked, or torn, exposing the shift cable and possibly other components to unwanted dirt, water, mud, you name it. You don't want that.
Shimano Alfine SG-S700 Right Hand Dust Cap
$26.25
Don't let a cracked or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.
Shimano CJ-8S20 Nexus/Alfine 8 Speed Hub Cassette Joint Set
$27.00
Cassette joint set for Shimano Nexus/Alfine 8 speed internally geared hub.
Shimano CJ-NX10 Nexus 4/7 Speed Hub Cassette Joint Unit
$27.00
Replacement cassette joint unit for Shimano Nexus 4 or 7 speed internally geared hubs.
Shimano Alfine & Nexus 8 Speed Small Parts Kit
$33.00
Small parts kit for Shimano Alfine & Nexus 8 Speed internally geared hubs.
Shimano Alfine S700 Cassette Joint Unit
$35.00
Shimano Nexus and Alfine Internally Geared Hub Cassette Joints - Shimano model # CJ-S700 - Does not include cable fixing bolt unit - OEM cassette joint unit for Alfine SG-S700
Salsa Rear Stainless Flip-Off Skewer
$44.00
- Standard skewers fit either 130 or 135mm spaced hubs, unless listed as another length (i.e. 170mm) - 6061 machined lever with stainless steel pivot and laser-etched logo - All shafts are 5mm in diameter
SRAM 7 Speed Push Rod Guide
$5.00
Replacement push rod guide for SRAM hub systems.
SRAM / Sachs Pull Chain
$9.00 - $15.00
Replacement pull chain for SRAM and Sachs systems.
Problem Solvers Axle Nut
$5.00
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
Pinhead Pinhead Solid Axle 10mm Locking Nut
$58.00
Includes two lock nuts and one coded key. Locks one wheel to your frame in the 10mm sizing.
Pinhead Pinhead Solid Axle 9mm Locking Nut
$58.00
Includes two lock nuts and one coded key. Locks one wheel to your frame in the 9mm sizing.
Pinhead Pinhead Solid Axle 3/8
$60.00
Includes two lock nuts and one coded key. Locks one wheel to your frame in 3/8" size for Internal Gear Hubs.
Pinhead 2pc Security Skewer
$85.00
Includes front and rear wheel locking skewers and coded key. Prevents removal of your wheels from your frame. Protects your wheels for a fraction of their replacement cost. Keyed-alike sets can be ordered to protect your other bikes. Quick release locks use a different key than solid axle locks
Pinhead Pinhead 2pc Solid Axle Front/Rear Lock Nuts (M9/M10)
$88.00
Includes four locknuts and one coded key for both wheels. Locks both your wheels to your frame. Includes 1 set of M9 and M10 locks.
Phil Wood Phil Spec'd Bearings
$15.00 - $22.00
Phil Wood & Co. is credited with pioneering the first modern production sealed bearing cycling components. Our bearings both standard and low drag carbonyte are manufactured for us to our specifications. We specify the race tolerance, surface honing, ball diameter tolerance, bearing material, gap dimensions, and seal specifications. Standard bearings are 100% filled with Phil Waterproof Grease to ensure maximum durability.
Enduro Cartridge Bearings
$8.25 - $20.00
Enduro bearings are filled with high precision ball bearings for maximum load capacity.
Continental Easy Tape Rim Strips
$11.00 - $15.00
Continental's Easy Tape Rim Strips are 20mm wide and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes they quick and easy to install. Just stretch them over your rims and let them snap in place! Each box contain a pair of rim strips.
Continental Easy Tape HP Rim Strip
$13.50
Small component with a large impact. A poorly constructed or unsuitable tyre rim tape can be the cause of many punctures. It is especially important with hollow section rims to use a pressure-resistant rim band which covers the entire rim. The fabric-reinforced Continental Easy Tape rim protector is designed for use under high air pressure conditions. The various widths enable a perfect fit for all standard rims. The high pressure design for racing cyclists withstands up to 220 psi, without becoming deformed. The flat construction type also significantly eases the job of tyre fitting.
Chris King Conversion Axles
$100.00 - $132.00
Chris King's one piece axles are quickly interchangeable allowing you to easily transfer your Chris King equipped wheels between bicycles.
Chris King ISO SD 100 x 15mm Front Axle
$100.00
Axle conversion kits are required for converting your current hub to be used on various other axle platforms. - Small Diameter (SD) Axle for 15mm forks - Fits Chris King ISO SD Front Hubs (9mm and 15mm only) - Takes existing 9mm QR Chris King ISO Hubs and allows you to run a 15mm Thru Axle - All axles require an adjusting clamp for installation
 Fibrefix Spoke
$22.00
Fiberfix Spoke replaces spokes on any wheel. Handy case and instructions are provided. No freewheel removal required. Spoke wrench included. Works on front or rear wheel. Kevlar is stronger than steel. It's perfect for mountain biking and long distance touring.
Previous page Page 2 of 2