Parts & Accessories
Fiberfix Spoke replaces spokes on any wheel. Handy case and instructions are provided. No freewheel removal required. Spoke wrench included. Works on front or rear wheel. Kevlar is stronger than steel. It's perfect for mountain biking and long distance touring.
Rack Fit System Long Quick Release. Compatible with: - Outpost Front Rack - Outpost Rear Rack - Central Rear Rack - Interlock Rear Rack
$100.00 - $132.00
Chris King's one piece axles are quickly interchangeable allowing you to easily transfer your Chris King equipped wheels between bicycles.
Axle conversion kits are required for converting your current hub to be used on various other axle platforms. - Small Diameter (SD) Axle for 15mm forks - Fits Chris King ISO SD Front Hubs (9mm and 15mm only) - Takes existing 9mm QR Chris King ISO Hubs and allows you to run a 15mm Thru Axle - All axles require an adjusting clamp for installation
Small component with a large impact. A poorly constructed or unsuitable tyre rim tape can be the cause of many punctures. It is especially important with hollow section rims to use a pressure-resistant rim band which covers the entire rim. The fabric-reinforced Continental Easy Tape rim protector is designed for use under high air pressure conditions. The various widths enable a perfect fit for all standard rims. The high pressure design for racing cyclists withstands up to 220 psi, without becoming deformed. The flat construction type also significantly eases the job of tyre fitting.
Continental's Easy Tape Rim Strips are 20mm wide and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes they quick and easy to install. Just stretch them over your rims and let them snap in place! Each box contain a pair of rim strips.
$6.00 - $20.00
Enduro bearings are filled with high precision ball bearings for maximum load capacity.
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
$15.00 - $22.00
Phil Wood & Co. is credited with pioneering the first modern production sealed bearing cycling components. Our bearings both standard and low drag carbonyte are manufactured for us to our specifications. We specify the race tolerance, surface honing, ball diameter tolerance, bearing material, gap dimensions, and seal specifications. Standard bearings are 100% filled with Phil Waterproof Grease to ensure maximum durability.
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork.
Replacement push rod guide for SRAM hub systems.
Replacement locating sleeve (cable to chain) for SRAM T3 Systems.
$9.00 - $15.00
Replacement pull chain for SRAM and Sachs systems.
- Standard skewers fit either 130 or 135mm spaced hubs, unless listed as another length (i.e. 170mm) - 6061 machined lever with stainless steel pivot and laser-etched logo - All shafts are 5mm in diameter
Replacement plastic spline cover for Shimano Nexus roller brake hubs.
Replacement spline cover for Shimano Nexus roller brakes.
Replacement snap ring for Shimano Nexus 3 speed internally geared hubs.
Replacement return spring for Shimano Nexus SG-8R20 internally geared hub.
Replacement coaster brake arm clip for Shimano coaster brakes.
Replacement retainer bearing for Shimano Nexus SG-7R40 internally geared hub.
Don't let a bent or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.
Replacement snap ring for Shimano Nexus 8 speed internally geared hubs.
$4.00 - $8.00
Replacement non-turn washers for Shimano Nexus internally geared hubs.
Replacement right side dust cap for Shimano Nexus 7 Speed internally geared hubs.
Replacement retainer bearing for Shimano Nexus 8 internally geared hub.
Replacement dust seal for Shimano Nexus SG-8R20 internally geared hubs.
Replacement rear dome nut for Shimano Nexus internally geared hubs.
Replacement cone with dust cap for Shimano Nexus 7R30 internally geared hub.
Replacement left side cone for Shimano Nexus 3 speed internally geared hub.
Replacement Cable Pinch Bolt for Shimano Alfine and Nexus internally geared hub systems.
For use with Shimano BR-C050-IM-F Roller brake.
$7.00 - $14.00
Replacement non-turn washer for vertical dropout for the Shimano Nexus/Alfine internally geared hub.
Replacement cassette joints for Shimano Nexus 4 and 7 speed internally geared hubs.
Replacement cassette joint lock ring for Shimano Nexus internally geared hubs. For use with Shimano Nexus SG-5R35 internal hub gears. This Cassette Joint Fixing Ring can also be used on the following internal hub gears: - Shimano Alfine SG-S7001-8 / SG-S7000-8 / SG-S700 / SG-S501 / SG-S500 - Shimano Nexus SG-C6011-8R / SG-C6011-8V - Shimano Nexus SG-C6010-8R / SG-C6010-8V - Shimano Nexus SG-C6001-8C / SG-C6001-8CD / SG-C6001-8D / SG-C6001-8R / SG-C6001-8V - Shimano Nexus SG-C6000-8C / SG-C6000-8CD / SG-C6000-8D / SG-C6000-8R / SG-C6000-8V - Shimano Nexus SG-C3000-7C / SG-C3000-7C-DX / SG-C3000-7R - Shimano Nexus SG-8R36 / SG-8R35 / SG-8R31 / SG-8R30 - Shimano Nexus SG-8R27 / SG-8R25 / SG-8R22 / SG-8R20 / SG-8R20-Belt - Shimano Nexus SG-7R50 / SG-7R46 / SG-7R45 / SG-7R42 - Shimano Nexus SG-5R30 / SG-5R30-BT - Shimano Nexus SG-8C31 / SG-8C22 / SG-8C20 - Shimano Nexus SG-7C30 / SG-7C26 / SG-7C25 / SG-7C22 - Shimano Nexus SG-7C18 / SG-7C16 / SG-7C15
Replacement drive side retainer bearing for Shimano Nexus internally geared hubs.
Replacement outer casing holder unit for Shimano Nexus 8 internally geared hub.
Retainer ball bearing for Nexus 4 speed internal hub. 3/16 x 16
Replacement retainer bearing for Shimano Nexus 8 internally geared hub. Ball Retainer "O" 3/16x26
Replacement barrel adjuster for Shimano roller brake systems.
Don't let a cracked or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.
This outer receiver unit works with the CJ-S700 Cassette Joint Unit for Shimano Alfine SG-S700 internally geared hub. This part can become worn, cracked, or torn, exposing the shift cable and possibly other components to unwanted dirt, water, mud, you name it. You don't want that.
Cassette joint set for Shimano Nexus/Alfine 8 speed internally geared hub.
Replacement cassette joint unit for Shimano Nexus 4 or 7 speed internally geared hubs.
Replacement bell crank for Shimano Nexus internally geared hub.
Small parts kit for Shimano Alfine & Nexus 8 Speed internally geared hubs.
Shimano Nexus and Alfine Internally Geared Hub Cassette Joints - Shimano model # CJ-S700 - Does not include cable fixing bolt unit - OEM cassette joint unit for Alfine SG-S700
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
$26.00 - $31.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Stan's Cross Country 29er Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Replacement rear non-drive axle nut for Sturmey-Archer internally geared hubs.
• M9 axle nut • For use on Sturmey Front Hubs
Replacement indicator axle nut for Sturmey-Archer internally geared hubs.
Replacement inner washer for Sturmey-Archer internally geared hub HMW-531
$5.00 - $10.00
Cable Housing Stop clip.
Replacement cable knarp/pinch bolt assembly for Sturmey-Archer Drum Brakes.
Replacement rear hub drive side axle nut for Sturmey-Archer internally geared hubs.
Replacement guide nut for Sturmey-Archer S3X internally geared hubs.
Page 1 of 2 Next page