Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

 Fibrefix Spoke
$22.00
Fiberfix Spoke replaces spokes on any wheel. Handy case and instructions are provided. No freewheel removal required. Spoke wrench included. Works on front or rear wheel. Kevlar is stronger than steel. It's perfect for mountain biking and long distance touring.
Blackburn Rack Fit System Long Quick Release
$37.00
Rack Fit System Long Quick Release. Compatible with: - Outpost Front Rack - Outpost Rear Rack - Central Rear Rack - Interlock Rear Rack
Chris King Conversion Axles
$100.00 - $132.00
Chris King's one piece axles are quickly interchangeable allowing you to easily transfer your Chris King equipped wheels between bicycles.
Chris King ISO SD 100 x 15mm Front Axle
$100.00
Axle conversion kits are required for converting your current hub to be used on various other axle platforms. - Small Diameter (SD) Axle for 15mm forks - Fits Chris King ISO SD Front Hubs (9mm and 15mm only) - Takes existing 9mm QR Chris King ISO Hubs and allows you to run a 15mm Thru Axle - All axles require an adjusting clamp for installation
Continental Easy Tape HP Rim Strip
$13.50
Small component with a large impact. A poorly constructed or unsuitable tyre rim tape can be the cause of many punctures. It is especially important with hollow section rims to use a pressure-resistant rim band which covers the entire rim. The fabric-reinforced Continental Easy Tape rim protector is designed for use under high air pressure conditions. The various widths enable a perfect fit for all standard rims. The high pressure design for racing cyclists withstands up to 220 psi, without becoming deformed. The flat construction type also significantly eases the job of tyre fitting.
Continental Easy Tape Rim Strips
$13.50
Continental's Easy Tape Rim Strips are 20mm wide and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes they quick and easy to install. Just stretch them over your rims and let them snap in place! Each box contain a pair of rim strips.
Enduro Cartridge Bearings
$6.00 - $20.00
Enduro bearings are filled with high precision ball bearings for maximum load capacity.
Kinetic Skewer
$15.00
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
Phil Wood Phil Spec'd Bearings
$15.00 - $22.00
Phil Wood & Co. is credited with pioneering the first modern production sealed bearing cycling components. Our bearings both standard and low drag carbonyte are manufactured for us to our specifications. We specify the race tolerance, surface honing, ball diameter tolerance, bearing material, gap dimensions, and seal specifications. Standard bearings are 100% filled with Phil Waterproof Grease to ensure maximum durability.
Problem Solvers Axle Nut
$4.00
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
SRAM 7 Speed Push Rod Guide
$5.00
Replacement push rod guide for SRAM hub systems.
SRAM T3 Locating Sleeve
$5.00
Replacement locating sleeve (cable to chain) for SRAM T3 Systems.
SRAM / Sachs Pull Chain
$9.00 - $15.00
Replacement pull chain for SRAM and Sachs systems.
Salsa Rear Stainless Flip-Off Skewer
$44.00
- Standard skewers fit either 130 or 135mm spaced hubs, unless listed as another length (i.e. 170mm) - 6061 machined lever with stainless steel pivot and laser-etched logo - All shafts are 5mm in diameter
Shimano Nexus Roller Brake Plastic Spline Cover
$2.00
Replacement plastic spline cover for Shimano Nexus roller brake hubs.
Shimano Nexus Roller Brake Spline Cover
$2.00
Replacement spline cover for Shimano Nexus roller brakes.
Shimano Nexus 3 Snap Ring
$2.50
Replacement snap ring for Shimano Nexus 3 speed internally geared hubs.
Shimano 8R20 Nexus 8 Speed Return Spring
$3.00
Replacement return spring for Shimano Nexus SG-8R20 internally geared hub.
Shimano Coaster Brake Arm Clip 3/4
$3.00
Replacement coaster brake arm clip for Shimano coaster brakes.
Shimano Nexus SG-7R40 Retainer Bearing Non-Drive
$3.00
Replacement retainer bearing for Shimano Nexus SG-7R40 internally geared hub.
Shimano Alfine SG-S700 Right Hand Dust Cap D
$4.00
Don't let a bent or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.
Shimano Nexus 8 Snap Ring
$4.00
Replacement snap ring for Shimano Nexus 8 speed internally geared hubs.
Shimano Nexus Non-Turn Washer
$4.00 - $8.00
Replacement non-turn washers for Shimano Nexus internally geared hubs.
Shimano Nexus 7 Speed Dust Cap (Right)
$5.00
Replacement right side dust cap for Shimano Nexus 7 Speed internally geared hubs.
Shimano Nexus 8 SG-8R20 Retainer Bearing P
$5.00
Replacement retainer bearing for Shimano Nexus 8 internally geared hub.
Shimano Nexus Dust Seal (Type B)
$5.00
Replacement dust seal for Shimano Nexus SG-8R20 internally geared hubs.
Shimano Nexus Rear Dome Nut (3/8
$5.00
Replacement rear dome nut for Shimano Nexus internally geared hubs.
Shimano Shimano Nexus 7/8 Non-Drive Cone w/ Dust Cap
$6.00
Replacement cone with dust cap for Shimano Nexus 7R30 internally geared hub.
Shimano Shimano Nexus 3/4 Left Cone (Left)
$6.00
Replacement left side cone for Shimano Nexus 3 speed internally geared hub.
Shimano Alfine CJ-S700 Cable Pinch Bolt
$7.00
Replacement Cable Pinch Bolt for Shimano Alfine and Nexus internally geared hub systems.
Page 1 of 3 Next page