Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

 Fibrefix Spoke
$22.00
Fiberfix Spoke replaces spokes on any wheel. Handy case and instructions are provided. No freewheel removal required. Spoke wrench included. Works on front or rear wheel. Kevlar is stronger than steel. It's perfect for mountain biking and long distance touring.
Blackburn Rack Fit System Long Quick Release
$37.00
Rack Fit System Long Quick Release. Compatible with: - Outpost Front Rack - Outpost Rear Rack - Central Rear Rack - Interlock Rear Rack
Chris King Conversion Axles
$100.00 - $132.00
Chris King's one piece axles are quickly interchangeable allowing you to easily transfer your Chris King equipped wheels between bicycles.
Chris King ISO SD 100 x 15mm Front Axle
$100.00
Axle conversion kits are required for converting your current hub to be used on various other axle platforms. - Small Diameter (SD) Axle for 15mm forks - Fits Chris King ISO SD Front Hubs (9mm and 15mm only) - Takes existing 9mm QR Chris King ISO Hubs and allows you to run a 15mm Thru Axle - All axles require an adjusting clamp for installation
Continental Easy Tape HP Rim Strip
$13.50
Small component with a large impact. A poorly constructed or unsuitable tyre rim tape can be the cause of many punctures. It is especially important with hollow section rims to use a pressure-resistant rim band which covers the entire rim. The fabric-reinforced Continental Easy Tape rim protector is designed for use under high air pressure conditions. The various widths enable a perfect fit for all standard rims. The high pressure design for racing cyclists withstands up to 220 psi, without becoming deformed. The flat construction type also significantly eases the job of tyre fitting.
Continental Easy Tape Rim Strips
$13.50
Continental's Easy Tape Rim Strips are 20mm wide and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes they quick and easy to install. Just stretch them over your rims and let them snap in place! Each box contain a pair of rim strips.
Enduro Cartridge Bearings
$6.00 - $20.00
Enduro bearings are filled with high precision ball bearings for maximum load capacity.
Kinetic Skewer
$15.00
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
Phil Wood Phil Spec'd Bearings
$15.00 - $22.00
Phil Wood & Co. is credited with pioneering the first modern production sealed bearing cycling components. Our bearings both standard and low drag carbonyte are manufactured for us to our specifications. We specify the race tolerance, surface honing, ball diameter tolerance, bearing material, gap dimensions, and seal specifications. Standard bearings are 100% filled with Phil Waterproof Grease to ensure maximum durability.
Problem Solvers Axle Nut
$4.00
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
SRAM 7 Speed Push Rod Guide
$5.00
Replacement push rod guide for SRAM hub systems.
SRAM T3 Locating Sleeve
$5.00
Replacement locating sleeve (cable to chain) for SRAM T3 Systems.
SRAM / Sachs Pull Chain
$9.00 - $15.00
Replacement pull chain for SRAM and Sachs systems.
Salsa Rear Stainless Flip-Off Skewer
$44.00
- Standard skewers fit either 130 or 135mm spaced hubs, unless listed as another length (i.e. 170mm) - 6061 machined lever with stainless steel pivot and laser-etched logo - All shafts are 5mm in diameter
Shimano Nexus Roller Brake Plastic Spline Cover
$2.00
Replacement plastic spline cover for Shimano Nexus roller brake hubs.
Shimano Nexus Roller Brake Spline Cover
$2.00
Replacement spline cover for Shimano Nexus roller brakes.
Shimano Nexus 3 Snap Ring
$2.50
Replacement snap ring for Shimano Nexus 3 speed internally geared hubs.
Shimano 8R20 Nexus 8 Speed Return Spring
$3.00
Replacement return spring for Shimano Nexus SG-8R20 internally geared hub.
Shimano Coaster Brake Arm Clip 3/4
$3.00
Replacement coaster brake arm clip for Shimano coaster brakes.
Shimano Nexus SG-7R40 Retainer Bearing Non-Drive
$3.00
Replacement retainer bearing for Shimano Nexus SG-7R40 internally geared hub.
Shimano Alfine SG-S700 Right Hand Dust Cap D
$4.00
Don't let a bent or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.
Shimano Nexus 8 Snap Ring
$4.00
Replacement snap ring for Shimano Nexus 8 speed internally geared hubs.
Shimano Nexus Non-Turn Washer
$4.00 - $8.00
Replacement non-turn washers for Shimano Nexus internally geared hubs.
Shimano Nexus 7 Speed Dust Cap (Right)
$5.00
Replacement right side dust cap for Shimano Nexus 7 Speed internally geared hubs.
Shimano Nexus 8 SG-8R20 Retainer Bearing P
$5.00
Replacement retainer bearing for Shimano Nexus 8 internally geared hub.
Shimano Nexus Dust Seal (Type B)
$5.00
Replacement dust seal for Shimano Nexus SG-8R20 internally geared hubs.
Shimano Nexus Rear Dome Nut (3/8
$5.00
Replacement rear dome nut for Shimano Nexus internally geared hubs.
Shimano Shimano Nexus 7/8 Non-Drive Cone w/ Dust Cap
$6.00
Replacement cone with dust cap for Shimano Nexus 7R30 internally geared hub.
Shimano Shimano Nexus 3/4 Left Cone (Left)
$6.00
Replacement left side cone for Shimano Nexus 3 speed internally geared hub.
Shimano Alfine CJ-S700 Cable Pinch Bolt
$7.00
Replacement Cable Pinch Bolt for Shimano Alfine and Nexus internally geared hub systems.
Shimano BR-C050-IM-F Roller Brake Grease Port Plus
$7.00
For use with Shimano BR-C050-IM-F Roller brake.
Shimano Nexus/Alfine Non-Turn Washers for Vertical Dropouts
$7.00 - $14.00
Replacement non-turn washer for vertical dropout for the Shimano Nexus/Alfine internally geared hub.
Shimano Nexus 4/7 Speed Cassette Joint
$8.00
Replacement cassette joints for Shimano Nexus 4 and 7 speed internally geared hubs.
Shimano Nexus 7/8 Speed Cassette Joint Lock Ring
$8.00
Replacement cassette joint lock ring for Shimano Nexus internally geared hubs. For use with Shimano Nexus SG-5R35 internal hub gears. This Cassette Joint Fixing Ring can also be used on the following internal hub gears: - Shimano Alfine SG-S7001-8 / SG-S7000-8 / SG-S700 / SG-S501 / SG-S500 - Shimano Nexus SG-C6011-8R / SG-C6011-8V - Shimano Nexus SG-C6010-8R / SG-C6010-8V - Shimano Nexus SG-C6001-8C / SG-C6001-8CD / SG-C6001-8D / SG-C6001-8R / SG-C6001-8V - Shimano Nexus SG-C6000-8C / SG-C6000-8CD / SG-C6000-8D / SG-C6000-8R / SG-C6000-8V - Shimano Nexus SG-C3000-7C / SG-C3000-7C-DX / SG-C3000-7R - Shimano Nexus SG-8R36 / SG-8R35 / SG-8R31 / SG-8R30 - Shimano Nexus SG-8R27 / SG-8R25 / SG-8R22 / SG-8R20 / SG-8R20-Belt - Shimano Nexus SG-7R50 / SG-7R46 / SG-7R45 / SG-7R42 - Shimano Nexus SG-5R30 / SG-5R30-BT - Shimano Nexus SG-8C31 / SG-8C22 / SG-8C20 - Shimano Nexus SG-7C30 / SG-7C26 / SG-7C25 / SG-7C22 - Shimano Nexus SG-7C18 / SG-7C16 / SG-7C15
Shimano Nexus Drive Side Retainer Bearing
$8.00
Replacement drive side retainer bearing for Shimano Nexus internally geared hubs.
Shimano Nexus 8 Outer Casing Holder Unit
$9.00
Replacement outer casing holder unit for Shimano Nexus 8 internally geared hub.
Shimano Nexus 4 Speed Retainer Ball Bearing
$10.00
Retainer ball bearing for Nexus 4 speed internal hub. 3/16 x 16
Shimano Nexus 8 SG-8R20 Ball Retainer
$10.00
Replacement retainer bearing for Shimano Nexus 8 internally geared hub. Ball Retainer "O" 3/16x26
Shimano Barrel Adjuster for Roller Brakes
$13.00
Replacement barrel adjuster for Shimano roller brake systems.
Shimano Alfine SG-S700 Right Hand Dust Cap
$15.00
Don't let a cracked or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.
Shimano Alfine SG-S700 Outer Receiver Unit
$16.50
This outer receiver unit works with the CJ-S700 Cassette Joint Unit for Shimano Alfine SG-S700 internally geared hub. This part can become worn, cracked, or torn, exposing the shift cable and possibly other components to unwanted dirt, water, mud, you name it. You don't want that.
Shimano CJ-8S20 Nexus/Alfine 8 Speed Hub Cassette Joint Set
$20.00
Cassette joint set for Shimano Nexus/Alfine 8 speed internally geared hub.
Shimano CJ-NX10 Nexus 4/7 Speed Hub Cassette Joint Unit
$22.00
Replacement cassette joint unit for Shimano Nexus 4 or 7 speed internally geared hubs.
Shimano Alfine & Nexus 8 Speed Small Parts Kit
$33.00
Small parts kit for Shimano Alfine & Nexus 8 Speed internally geared hubs.
Shimano Alfine S700 Cassette Joint Unit
$35.00
Shimano Nexus and Alfine Internally Geared Hub Cassette Joints - Shimano model # CJ-S700 - Does not include cable fixing bolt unit - OEM cassette joint unit for Alfine SG-S700
Stan's NoTubes Tubeless Valve Stems
$25.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Stan's NoTubes Rim Tape
$26.00 - $31.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Stan's NoTubes Cross Country 29er Rim Strip
$30.00
Stan's Cross Country 29er Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Sturmey-Archer Internal Hub Compatible Axle Nut (Right)
$2.00
Replacement axle nut compatible with Sturmey-Archer internally geared hubs.
Sturmey-Archer Front Hub Axle Nut
$3.00
• M9 axle nut • For use on Sturmey Front Hubs
Sturmey-Archer Indicator Axle Nut
$3.00
Replacement indicator axle nut for Sturmey-Archer internally geared hubs.
Sturmey-Archer Inner Washer for Sturmey-Archer Hub
$4.00
Replacement inner washer for Sturmey-Archer internally geared hub HMW-531
Sturmey-Archer Cable Housing Stop Chainstay
$5.00 - $10.00
Cable Housing Stop clip.
Sturmey-Archer Rear Hub Non-Drive Axle Nut
$5.00
Replacement rear non-drive axle nut for Sturmey-Archer internally geared hubs.
Sturmey-Archer Guide Nut 13/32
$6.00
Replacement rear hub drive side axle nut for Sturmey-Archer internally geared hubs.
Sturmey-Archer Guide Nut Short 13/32
$6.00
Replacement guide nut for Sturmey-Archer S3X internally geared hubs.
Sturmey-Archer Internal Hub Indicator Chain
$6.00 - $7.00
Sturmey-Archer gear indicator spindle chain. If you are unsure which version you require please feel free to contact us.
Sturmey-Archer Brake Arm Band
$8.50
Replacement brake arm band for Sturmey-Archer roller brake systems. HCB101 HCB103 HSL702 HSL767 HSL769 HSL761 HSL768 HSL703
Page 1 of 2 Next page