Internally Geared Hub Spares
$135.00 - $160.00
• 3 Speed internal gear hub without coaster brake • Available for 116mm, 119mm & 127mm dropout spacing • Classic 3 speed gear ratio of 177% • Includes twist shifter, 18T sprocket, cables and mounting hardware • 36 Hole
Sturmey-Archer's front hub with 70mm or 90mm drum brake.
• Front dynamo hub with 70mm drum brake • Totally sealed against any weather condition • 36 hole • Polished aluminum hubshell • 6V-3.0W generation capacity
Focus on the ride, not your gear with SRAM's Automatix 2 Speed Hub. A centrifugal clutch in the hub automatically changes gears based on your speed, and a coaster brake takes care of the stopping so there's no shifter, no cables, and no nonsense. All you'll have to do is sit up and enjoy the ride!
An oil change should be annually carried out or at least every 5000km. Through this process it can be safe to say that there will always be enough oil in the hub regardless of oil loss (due to sweat oil) and that any penetrated water will be rinsed out. For a problem-free oil change we recommend the use of the Rohloff Oil change kit. The Oil Change Kit consists of: Oil change kit complete 25ml cleaning oil in a 50ml bottle 25ml all seasons oil Oil filling tube Drain screw with thread sealant
Small parts kit for Shimano Alfine & Nexus 8 Speed internally geared hubs.
Shimano SM-S700 Alfine 11-Speed Hub Components. Alfine fitting kit including vertical drop out non-turn washers (8R / 8L), cap nuts, snap ring and CJ-S700 cassette joint unit. Shimano Alfine 11-Speed Hub not included.
Replacement bell crank for Shimano Nexus internally geared hub.
Cassette joint set for Shimano Nexus/Alfine 8 speed internally geared hub.
Replacement cassette joint unit for Shimano Nexus 4 or 7 speed internally geared hubs.
Cassette joint unit for SL-S7000-8 series Shimano internally geared hubs.
$9.00 - $15.00
Replacement pull chain for SRAM and Sachs systems.
Replacement barrel adjuster for Shimano roller brake systems.
Retainer ball bearing for Nexus 4 speed internal hub. 3/16 x 16
Replacement retainer bearing for Shimano Nexus 8 internally geared hub. Ball Retainer "O" 3/16x26
$5.00 - $10.00
Cable Housing Stop clip.
Replacement outer casing holder unit for Shimano Nexus 8 internally geared hub.
Replacement brake arm band for Sturmey-Archer roller brake systems. HCB101 HCB103 HSL702 HSL767 HSL769 HSL761 HSL768 HSL703
Replacement shift rod for SRAM Dual Drive systems.
Replacement cassette joints for Shimano Nexus 4 and 7 speed internally geared hubs.
Replacement cassette joint lock ring for Shimano Nexus internally geared hubs. For use with Shimano Nexus SG-5R35 internal hub gears. This Cassette Joint Fixing Ring can also be used on the following internal hub gears: - Shimano Alfine SG-S7001-8 / SG-S7000-8 / SG-S700 / SG-S501 / SG-S500 - Shimano Nexus SG-C6011-8R / SG-C6011-8V - Shimano Nexus SG-C6010-8R / SG-C6010-8V - Shimano Nexus SG-C6001-8C / SG-C6001-8CD / SG-C6001-8D / SG-C6001-8R / SG-C6001-8V - Shimano Nexus SG-C6000-8C / SG-C6000-8CD / SG-C6000-8D / SG-C6000-8R / SG-C6000-8V - Shimano Nexus SG-C3000-7C / SG-C3000-7C-DX / SG-C3000-7R - Shimano Nexus SG-8R36 / SG-8R35 / SG-8R31 / SG-8R30 - Shimano Nexus SG-8R27 / SG-8R25 / SG-8R22 / SG-8R20 / SG-8R20-Belt - Shimano Nexus SG-7R50 / SG-7R46 / SG-7R45 / SG-7R42 - Shimano Nexus SG-5R30 / SG-5R30-BT - Shimano Nexus SG-8C31 / SG-8C22 / SG-8C20 - Shimano Nexus SG-7C30 / SG-7C26 / SG-7C25 / SG-7C22 - Shimano Nexus SG-7C18 / SG-7C16 / SG-7C15
Replacement drive side retainer bearing for Shimano Nexus internally geared hubs.
$4.00 - $8.00
Replacement non-turn washers for Shimano Nexus internally geared hubs.
3-speed shifter cable anchorage and adjuster for bicycle repair on Raleigh, Schwinn, Sears, Huffy, Murray and any bicycle that uses Sturmey Archer internal hubs.
Replacement Cable Pinch Bolt for Shimano Alfine and Nexus internally geared hub systems.
Replacement non-turn washer for vertical dropout for the Shimano Nexus/Alfine internally geared hub.
$6.00 - $7.00
Sturmey-Archer gear indicator spindle chain. If you are unsure which version you require please feel free to contact us.
Replacement cone with dust cap for Shimano Nexus 7R30 internally geared hub.
Replacement left side cone for Shimano Nexus 3 speed internally geared hub.
Replacement rear hub drive side axle nut for Sturmey-Archer internally geared hubs.
Page 1 of 2 Next page