$8.00 - $35.32
- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air
RO X REGULAR brings the aspect of polymerization and MRCC technology by bonding Dumonde Tech's formulation to the chains inner surfaces. MRCC technology creates an extremely low friction bond. A dry lubricant that does not attract dust and dirt. Waterproof which will not wash off. Drive train stays clean, last longer, runs silent. Extremely durable, outlasts all other chain lubes in any condition. Tamely scented. Applied sparingly for the best results and increased value. Can be shipped around the world via air freight and ground. PRO X REGULAR is the heavier version to Dumonde Tech's PRO X LITE chain lubricant. PRO X REGULAR is ideal for Mountain Bike, Cyclocross and all extreme condition, while maintaining a clean drive train. PRO X REGULAR can used on all cables, pivots points and seals. Safe on plastic, rubber and all seal materials. The product is designed to not harm your components. Dumonde Tech's products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in the extreme cold conditions. Benefits: – PRO X reduces resistance and reduces watts used. – PRO X products have no shipping restrictions, can be sent any where in the world by air or ground. – PRO X is VOC Exempt. Meets California VOC requirements. Preparation and Application of Dumonde Tech PRO X Regular Chain Lube: To prepare for maximum performance from Dumonde Tech’s PRO X Regular Chain Lube, use a high quality cleaner or solvent to thoroughly clean then chain and let it dry before your first application of PRO X Regular chain lubrication. You will only need to clean the chain once, prior to the first application of PRO X REGULAR. For optimum performance, 2-3 applications is required for the bonding process to occur through polymerization.
Dumonde Tech is the first and only lubricant company in the bicycle industry to specifically design a lubricant for Pawl style freehubs which require a lightweight lubricant. PRO X Freehub Oil using Dumonde Tech's MRCC Micro Resistant Complex Compounds is an improved new technology, of Dumonde Tech's original freehub oil. PRO X Freehub Oil performs better in an even wider temperature range. “Flow Point” is lower then -40F / -40C degrees, is extremely low friction, providing superior protection. No sticking pawls due to age or temperatures. Follow the manufacture’s specification for the volume of oil required in your freehub body to experience the ultimate performance of your freehhub using Dumonde Tech’s PRO X Freehub Oil. The viscosity and temperature range of PRO X Freehub Oil makes it the “go to” cable lube and brake lever lubricant for the small moving parts and the light weight spring action they have. Temperatures and age do not effect the performance of PRO X Freehub Oil like other OE greases or thick, time and temperature aged greases. These become thicker and stickier as they age slowing down the important movement of the parts. Dumonde Tech's MRCC Micro Resistant Complex Compounds have been in development for over 10 years by Dumonde Tech Design Group. MRCC technology provides premium lubrication by reducing friction better than other lubricants. Lighter viscosity while maintaining high protection. The increase in adhesion creates higher film strength. Originally developed for Dumonde Tech's Motorsports lubrications, MRCC, is incorporated into Dumonde Tech's revolutionary PRO X bicycle lubricants. Everyone who has tested or raced using PRO X, report that its performance is significantly better then any other lube they have ever used. Benefits: – PRO X reduces resistance and reduces watts used. – PRO X products have no shipping restrictions, can be sent around the world by air mail. – PRO X has <3% VOC. Exceeds California VOC requirements.
$22.00 - $41.00
PRO X Freehub Grease, using Dumonde Tech's MRCC Micro Resistant Complex Compounds, is specifically designed for all freehubs that require a very light weight grease. More complex non-pawl freehubs need a grease to stay in the mechanisms moving parts. Oils generally are to thin and will move away from moving parts leaving them exposed to wear and malfunction due to lack of lubrication. PRO X Freehub Grease performs in a broad temperature range from the summers heat to the extreme cold temperatures. “Flow Point” of PRO X Freehub Grease is -30F / -34C degrees. PRO X Freehub Grease works exceptional in hubs that share lubrication between the freehub pawls and wheel bearings. Follow the manufacture’s specification for the volume required in your freehub body to experience the superior performance of Dumonde Tech’s PRO X Freehub Grease. Dumonde Tech'sr MRCC Micro Resistant Complex Compounds have been in development for over 10 years by Dumonde Tech Design Group. MRCC technology provides premium lubrication by reducing friction better than other lubricants. Lighter viscosity while maintaining high protection. The increase in adhesion creates higher film strength. Originally developed for Dumonde Tech's Motorsports lubrications, MRCC, is incorporated into Dumonde Tech's revolutionary PRO X bicycle lubricants. Everyone who has tested or raced using PRO X, report that its performance is significantly better then any other lube they have ever used. Benefits: – PRO X reduces resistance and reduces watts used. – PRO X products have no shipping restrictions, can be sent any where in the world by air or ground. – PRO X has low or no VOC’s, meets California VOC requirements.
$9.99 - $56.99
Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant
$9.99 - $56.99
For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.
$13.00 - $49.00
Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.
Finish Line's Chill Zone works like magic to loosen and free rusted parts! Before discarding your rusted chain or giving up on a frozen crank bolt, a sticky derailleur, or a seized seatpost, give Chill Zone a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. Chill Zone has a special refrigerant that freezes metal as low as -50°F/-45°C contracting it and breaking the rust bond. Then Chill Zone's penetrant breaks down and flushes out the rust. With Chill Zone, most rusted parts quickly regain full functionality. Plus, it lubricates, too, so you don't need to add any. - Great for frozen crank bolts, seized seat posts and rusty chains and derailleurs - Includes oils and rust inhibitors to provide lubrication and protection after use - Use: Spray the rusted part for 10 to 20 seconds and wait 2-3 minutes for the release agent to fully wick in and break the rust. For severe rust-welded parts, spray 30-60 seconds for maximum freezing effect and wait ten minutes to one hour for thorough break-down of rust. When rehabbing a bicycle chain, soak one small section at a time.
E-Bike Chain Lube is designed to handle the unique requirements of electronic assist bicycles. E-Bike chains are exposed to higher torque and wattage loads. With this in mind, Finish Line engineered a light wet lube with unique extreme pressure additives to ensure that the lube stays within the premature wear and protecting against rust and corrosion. Finish Line’s E-Bike Chain Lube is an ideal complement to any dealer specializing in e-Bike sales and service.
$16.00 - $53.99
Designed for mixed to wet conditions, Chainj is an advanced biodegradable vegetable/synthetic oil blend engineered to provide superior efficiency, wear protection, and durability. The vegetable oil is not only sustainable but also associates ionically with metal surfaces creating a resilient protective barrier for added life and increased anti-wear properties. Additionally, Chainj features detergent properties which actively dissolve and isolate dirt as you ride. Great for lubrication of parts too! - Dissolves and isolates dirt for lasting performance in mixed conditions - Superior durability, wear protection and lubrication - Biodegradable, non-toxic, vegetable/synthetic formula
$16.00 - $112.29
Degreaser 13 takes degreasing chemistry to new levels with performance that must be seen to be believed. Your drivetrain hasn't been this clean since the day you bought it! Developed from scratch, specifically for the challenges of bicycle drivetrain degreasing, the advanced formula is engineered to fight its way to metal surfaces and stay there, then attack and break free the bonds holding oils, soils, and grime in place, and finally dissolve and contain to carry it all away. Fully water soluble and further activated by light scrubbing and rinsing, the result is a spotless residue-free drivetrain with every surface cleaned completely. Pedro's advanced formula is also safe to use on any material, fully biodegradable, solvent-free, plant-derived, and zero-VOC.
Pedro’s developed this environmentally benign bike wash to work on the entire bike. With a special foaming action, Green Fizz coats the bike and helps wash away the grit and grime from the toughest rides without harming delicate components or the environment. And, Green Fizz can be used straight from the bottle or diluted with water.
Green Fizz's biodegradable solvent-free formula can be safely used on all parts and materials, including carbon fiber, without washing away grease and lubricants or damaging delicate parts. - Advanced plant-derived surfactants quickly remove tough dirt and grime from the whole bike - Use on the whole bike without risk of damage or washing away grease/lube from critical parts - Safe, biodegradeable, phosphate-free, solvent-free, plant-derived, and zero-VOC - Can be used with or without water
Pedro’s Bike Lust includes a biodegradable cleaner to remove light amounts of grime from your bicycle. This silicone polish can be used on the frame and key parts to protect against UV rays, add shine and buff out scratches. Repeated usage builds a protective surface that makes future cleaning easy, too.
$26.00 - $103.99
The original bike polish, Bike Lust's proprietary silicone-based formula includes a biodegradable cleaning agent. Bike Lust goes on wet, quickly cleaning light dirt and grime as it polishes, and then dries to a beautiful protective coating. Works on any surface or material in one simple step, making your bike look like new and future cleaning easier! It's also great for dropper posts, suspension, and for seating tire beads. - Makes your bike shine like new and keeps it that way - Biodegradable formula cleans, polishes, and protects in one step - Also great for dropper posts, suspension, and for seating tire beads
Our Tenacious Oil is used for ultimate protection and durability for components that have movement with metal-to-metal contact. Our base oil has been produced for us by the same independent California refinery since 1971. Final blending of rust inhibitor and extreme wear addititves happen at our facility before the product is bottled and shipped.
$12.00 - $14.00
A thin-bodied lubricant which utilizes metal friction reducer technology for smooth shifting and a quiet drive train. Does not build up or become tacky; sheds dirt, mud, and abrasives. Also repels moisture and prevents corrosion.
Problem Solvers Frame Saver aerosol can with spout, 4.75oz. - Tried and true internal rust protection for steel frames - Protect your investment—each application lasts for years - One 4.75-ounch can treats 3 – 5 frames
An oil change should be annually carried out or at least every 5000km. Through this process it can be safe to say that there will always be enough oil in the hub regardless of oil loss (due to sweat oil) and that any penetrated water will be rinsed out. For a problem-free oil change we recommend the use of the Rohloff Oil change kit. The Oil Change Kit consists of: Oil change kit complete 25ml cleaning oil in a 50ml bottle 25ml all seasons oil Oil filling tube Drain screw with thread sealant
DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes - Brake Fluid Type: DOT 5.1 - Bottle Size (Brake Fluid): 4 oz - Application (Brake Fluid): Disc Brakes
Grease for internal hub systems. Perfectly suited for Nexus and Alfine systems.
Grease for Shimano roller break systems.
$33.99 - $199.99
One of the only bits of maintenance an internally geared hub needs is occasional oiling. Using the proper oil is essential, and, if you have a Shimano Alfine hub, you've found the right stuff. - Mineral oil based lubricant specifically for the Alfine 11-speed hub
Tri-Flow Superior Lubricant is the superior, light viscosity lube that allows for deep penetration into hard to reach moving parts. The 6.0 oz drip bottle application, with a convenient straw, allows for deep penetration in hard to reach moving parts. High-grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475°F) and humidity. Formulated solvents soften and remove dirt and contaminants, while special additives displace moisture and prevent rust and corrosion. Formulated with P.T.F.E.
White Lightning's Bamboo Cycles Wipes are the quick and easy solution for cleaning your hands, your bike, and anything else you can find. Made from bamboo, Cycle Wipes are tough, durable, and tear-resistant. They have a waffled texture that absorbs more grease and grime than ordinary wipes and are treated with a solution that is strong enough to clean drivetrain parts, plus safe enough to clean your hands, too. White Lightning's Bamboo Cycle Wipes are biodegradable.
Page 1 of 1