Seat Bags

The Rollpacker 15 with quick release aluminum hanger is a completely waterproof bikepacking seatbag that easily slides on and off for easy packing and handling and features a sealed liner. The Rollpacker aluminum hanger is adjustable and will easily adapt to small frames, and it eliminates all side-to-side movement (tail wag). This seat bag has one large waterproof main compartment and a second super-practical compartment that's also waterproof. You will also find an easy access pocket in between the rear pocket and main compartment; this open pocket is always accessible and great for smaller items that you need to keep close (small camera, phone, snacks, etc.). - Weight of seat bag: 454 g / 1 lbs - Weight of hanger: 363 g / .8 lbs - Volume: 15 L / 915 cu. in. - Maximum Load: 15.4 lbs / 7 kg. - If the seat rails of your saddle are more than 3.5 inches (89mm) apart, you will need the Wide Rails Adapter (SKU: RBSRA)

The Rollpacker 15 Rear with quick release aluminum hanger is completely waterproof and easily slides on and off for easy packing and handling. The Rollpacker aluminum hanger is adjustable and will easily adapt to small frames. It eliminates all side-to-side movement (Tail Wag). This seat bag has one large waterproof main compartment and a second practical compartment that is also waterproof. You will also find an easy access pocket between the rear pocket and main compartment. This open pocket is always accessible, great for smaller items that you need to keep close (small camera, phone, snacks, etc.) - Weight of seat bag: 454g / 1lbs - Weight of hanger: 363g / .8lbs - Volume: 15L / 915-inch³ - Maximum Load: 15.4lbs / 7kg Note: If the seat rails of your saddle are more than 3.5-inches (89mm) apart, you will need the Arkel RBSRA adaptor.

Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the ORTLIEB Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 8 to 16.5 liters or from 7 to 11 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you’re out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike or an electric mountain bike. The Seat-Pack is available in two sizes. Thanks to its elastic drawstrings on the top, the 16.5-liter model offers additional space for items you need to be able to access quickly. This model needs only 15 centimeters of space on your seat stem. The smaller of the two models needs only six centimeters on your seat stem. That’s why the more compact model is ideal for smaller frame sizes, full suspension bikes and adjustable seat stems.

Designed to make full use of the space under the saddle, eliminating the need for a rear rack. Constructed from high quality, waterproof materials and optimized for durability and weight. Performs best when used to carry lightweight, compressible gear, such as clothing or sleeping gear – but built super strong to handle other loads as well! Available in three sizes, to accommodate a range of cycling needs. – Regular: Ideal for long haul cycle touring. – Mid-Size: Ideal for off-road and weekend cycle touring. – Compact: Ideal for endurance road racers, randonneurs, commuters and other cycling enthusiasts. For guidance on packing and attaching your Saddle Pack, go here: http://www.apidura.com/content/uploads/2014/04/1502-Instructions-guide-Saddle-Pack.pdf

The classic saddle bag redesigned with new features and materials! Made specifically for bike saddles that have integrated bag loops under the seat (Brooks, Selle Anatomica, etc..) or can be attached at the front on to the handlebars. Perfect for everyday use or multiday trips, the saddle bag offer lots of room and easy access to your essentials. The top expansion along with the extendable front straps - allow for easy overpacking and securing your essentials. Features 3D top flap w/ 3M reflective piping 2" deep side pockets with buckle closures Side D-Rings for shoulder strap attachment Extendable front straps for overpacking Top flap with tactical attachment loops Double layer pull cord expansion top Internal hardwood dowl for stabilization Orange internal liner for easy visibility Two 18mm nylon straps for attaching on to the saddle loops Materials 1000D nylon DWR/PU exterior (Cordura™ or similar) 18oz Truck tarp liner (waterproof) Marilite™ 210D nylon expansion WR/PR Sunguard™ UVR poly B92 thread (anti-wicking) Flatweave nylon webbing Heavy-Duty plastic buckles Dimensions/Weight L: H 7.5" x W 14" x D 6.5" 650g XL: H 7.5" x W 17" x D 6.5" 760g Made in Montréal, Canada Craftsmanship Guaranteed

The Brooks Challenge Large Tool Bag is a saddle bag for fitment to the rear of a saddle bearing bag loops or over the handlebars. It features buckles located within the hold itself to ensure greater security while the strap that closes the unit encircles the bag's contents, preventing them from rattling during transit. The first Challenge was designed and patented in 1896. The Challenge Large has a lot in common with its distinguished predecessors, but now features triple the volume! - Width: 210mm - Height: 110mm - Depth: 70mm - Volume: 1.2L

The D-Shaped Bag was featured in Brooks Catalogues as far back as 1910. This innovative design features a two piece construction–while the outer sleeve remains permanently attached to the saddle, the bag has an inner purse that may be removed so that its owner may retain it, thus securing its valuable contents. The purse is attached to the sleeve by a "Sam Browne" fixing, preventing it from sliding out, even under extreme conditions. - Width: 165mm - Height: 110mm - Depth: 50mm - Volume: 0.4L

The first Brooks Challenge was designed and patented in 1896. This tool bag is for fitment to the rear of saddle bearing bag loops. It features buckles that, while fastening the bag to the saddle, are located within the hold itself, thus ensuring greater levels of security. The strap that secures the unit encircles the tools it carries to prevent them from rattling during transit. - Width: 175mm - Height: 78mm - Depth: 45mm - Volume: 0.5L

Ortlieb's Saddle-Bag Two is particularly suited for mountain and road biking, but is also an ideal supplementary bag for long tours with lots of luggage. Even the small version offers enough space for a spare tube, repair kit or rain jacket, whereas the larger model with 4.1 L almost replaces a backpack. It functions at the same time as kind of protection against mud and water spray just like fenders. Both models feature highly luminescent reflectors and daisychains for fixing a tail light. The roll closure is secured to the sides with buckles. The mounting set is available as accessory for a second bike. Saddle-Bag Two is made of PVC-free, sturdy nylon fabric, and is sustainably produced in Germany. OPTIONAL ACCESSORIES (each sold separately) - Seat mounting for saddlebag (art. code E97) - Strap system (article code F96 E) for fixing to comfort or spring saddles

The Mountain Wedge Expandable is the ideal wedge for the rider who occasionally wants to carry extra gear. - The three-point suspension system, with a side-release buckle on the main strap for easy access - Hook-and-loop material on the sides for added stability and load compression - The main strap provides support in both closed and expanded modes - Flat pocket on the underside of the bag - Made of Dupont Cordura - 3M reflective trim - Weight: 190 grams - Capacity: 115 cubic inches

The Bike Bag can be mounted on either the seat rails or the handlebars. - Two point attachment to handlebar or saddle - Perfect for cruiser and comfort bikes - Made of DuPont Cordura - 3M reflective striping for visibility - Weight: 80 grams - Capacity: 150 cubic inches

Following the motto “less is more“, the super lightweight saddlebag transports everything you need to take along your road bike or mountain bike. The handy roll closure with elastics ensures tight and waterproof storage of your gear. Super small dimensions allow mounting to your bike requiring very little space. Two metric screws permit easy mounting to the saddle rails. With the click and snap closure the saddle bag can be taken off with just one hand. A strong reflector provides safety in dusk and at night. Micro Two is PVC-free and sustainably produced in Germany. OPTIONAL ACCESSORY (each sold separately) - Seat mounting for saddlebag (article code E97) - strap system (article code F96 E) for fixing to comfort or spring saddles

Ortlieb's Saddle-Bag Micro keeps all your ride essentials dry with a light and waterproof roll closure. The reflective patch improves visibility in the dark.

Perfect for any rider, a great way to carry your emergency flat kit. This handy pouch can keep your tools organized and can be mounted under your saddle for easy access. Made in Montréal, Canada Craftsmanship Guaranteed Features Velcro adjustment strap (19") loops around the saddle rails Rolltop lunch bag construction to keep things in place Materials 1000D nylon exterior (Cordura™ or similar) Sunguard™ UVR poly B92 thread Heavy-duty industrial buckle and grosgrain trim (black) Velcro™ fastener system Dimensions/Weight H 8.5" x W 4.5" x L 3" (50g)