$267.00 - $272.00
We set out to create the most stable, low profile mounted, feature loaded, waterproof seat bag available. The Spinelock seat bag checks all the boxes. The Spinelock integrates user tested and approved features like a one-way air purge valve, rear light slots, loop and bungee deck, and an external plastic bottom with a new patented attachment system. Stability was the driving element in the design process. If you want something you can pack and forget, the Spinelock is your seat bag. How it works: The Spinelock stability system consists of three components: the saddle clamp, seat bag mounted “Spine” baseplate, and pin. A low profile, high strength, forged aluminum clamp works in combination with precision IGUS bushings to form the pin interface. Twin forged upper arms, fastened by Torx-25 bolts, rotate into position above the saddle rails for easy mounting. Resembling a spine ramp familiar to skateboarders, the "Spine" baseplate is made of an impact resistant UV-stabilized nylon and is integrated to the seat bag surface. The plate features two mounting positions to accommodate seatpost setback and saddle adjustments. To connect the bag, you simply line up your selected mounting position to the seat mounted clamp and slide the pin through the aligned holes. Attaching the side compression straps to the wings of the clamp fixes the pin in place and you’re ready to ride! Sizing: There are two size options, neither of which sacrifice features for capacity. The smaller but largely versatile Spinelock 10L maximizes your carry with minimal tire clearance and provies a generous amount of waterproof storage with additional space on the external corded deck. . If you are going on a long expedition or carrying cold weather gear we recommend checking out the Spinelock 16L. The 10L Spinelock requires 8"/20 cm tire clearance and 6.5"/16.4 cm exposed seat post. Click here for a visual reference. Features: Innovative Spinelock stability system completely eliminates side to side sway Waterproof construction Two mounting positions to accommodate seatpost setback and saddle adjustments. A low profile, high strength, forged aluminum clamp works in combination with precision IGUS bushings to form a quick-release pin interface making bag removal a cinch. Quick release bag from bike Internal HDPE plastic structure One way, low profile, air purge valve Carbon seatpost friendly Hypalon slots for a rear light Top mounted external webbing and bungee for additional storage Protective external plastic bottom frame sheet Active cam buckles prevent side straps from slipping on rough terrain. Important information on use and fit: - The Spinelock bag is not compatible with carbon fiber saddle rails. - The Spinelock bag is only compatible with traditional style saddle rails and may not be compatible with some models of Brooks saddles. - This product is not designed for use with dropper seatposts. - This bag is for carrying soft, pliable objects. sufficiently pad any hard edge objects like cookware to prevent premature wear. It is mandatory to check tire clearance prior to use, especially with full suspension bikes. Bag contact with a tire can cause a bad wreck and ruin your day. Tire damage to the bag is not covered by warranty. - A Torx-25 wrench is needed for installation. you likely already have one on your multi-tool! Specifications Weight: 22.5 ounces; 638 grams Volume: 10 liters; 610 cubic inches Materials: 210 Denier Ripstop Nylon with dual coated TPU, urethane based Hypalon reinforcement fabric, UV-stabilized, impact resistant nylon resin, forged aluminum. Imported.
From Revelate Designs website: "Tangle™ bags are rectangular-shaped half frame bags. They can be used for everyday riding & commuting, or any adventure big and small. The main compartment features an exit port for a hydration tube or battery wire, a zippered flat left side pocket holds smaller stuff. Attachment is made with reinforced velcro along the top tube, other mounts are adjustiable with webbing and low profile camlock buckles with strap keepers. All attachment points bartacked for strength. Tangle's usually leave room for both water bottle mounts. To check, measure the vertical height from the top of the bottle to the top tube and compare with bag height. In some cases you may need to use side entering cages or smaller bottles."
The Mag-Tank takes a new twist on top tube bags. Instead of a zippered opening, access to the bag is by a smartly contoured top flap held in place by a magnetic buckle with mechanical engagement (read - the magnet aids in closure, while load is placed on a connection). It will not unintentionally open and spill your gummy bears when you end up in the trees with your bike upside down like a conventional magnetic closure would. You can easily open the bag one handed by pulling outward on the cord loop and you have access to the whole top of the bag. To close, just flick the flap down and the buckle self-engages! The Mag-Tank is just a hair smaller than Revelate's Gas Tank to prevent leg movement from hitting the edge of the flap opening. Please note - while the cover to this bag is designed to shed rain and spray, due to the large panel opening it is not a sealed bag or waterproof bag. Features: - One-handed access while riding - Side panels stiffened with HDPE plastic sheets - Wrap around panel is padded with closed-cell foam - Interior lined with yellow fabric for greater visibility - Adjustable height daisy chain front attachment with a spacer block to clear stem clamp bolts - Beefy top tube strap has gripper material with double back wrap for bomber stability - Made in the USA with domestic and imported materials. Sizing: - Length: 8.5" - Max height: 5" - Width at stem: 2.5" - Tapers down to 2.5" tall and 1.5" wide along the top tube Specifications: - Weight: 4.5 oz. - Volume: Approximately 65 cubic inches - Materials: VX21 & 42 XPac, 420-denier yellow and red lining, closed-cell foam-padded tube sections, HDPE sheets
Page 1 of 1