This is the brightest dynamo powered bicycle headlight at 100 lux. The new optical system produces a smoother distribution of light on the road than any other headlight. The housing is anodized aluminum and acts as the heat sink for the LED. Available in either silver anodized or black anodized finish. The IQ-X has a standlight, as well as daytime running lights. Automatic switching between daytime and nighttime modes. The Senso/Off pushbutton switch is at the back of the IQ-X, surrounded by a glowing blue ring. The IQ-X always provides the ideal headlight beam; straight ahead in daylight so that oncoming car drivers are alerted to your presence, changing over at dusk to a beam optimized for illuminating the road surface ahead, but still providing high visibility to oncoming drivers. The IQ-X ships with its own highly adjustable mount, and is compatible with other Busch & Müller headlight mounts. For most applications the included mount will work. For bikes with limited clearance under the bottom headset cup or with cantilever brakes, use either the CYO or Thorn mount listed below. The IQ-X is reversible and can be used in "upright" or "upside-down"(i.e. hanging from the mounting point, as it might be on a front rack) orientation.
700% brighter than required by StVZO (German road traffic regulations). IQ reflector with indirect light source: Maximum consistent illumination, double lighting area. Busch & Muller create amazing dynamo and battery lights to amazingly high standards. The Lumotec IQ Cyo Senso Plus features an indirect lightsource for maximum consistent illumination. The Senso system automatically activates the entire lighting system when the hub dynamo is in operation and the Plus system features a standlight with condenser.
An excellent dynamo light in a very small package! Only 5 cm long and weighing only 70g, The Eyc is plenty bright for spirited riding on dark roads. 50 lux and great IQ2 optics gives you good visibility at a distance, but also excellent near-field illumination of the road ahead. The Eyc N Plus has a simple on/off switch and a stand light that shines when you stop (like at a stop light). It glows for several minutes and is a significant safety feature.
A modern taillight for mounting on your bike’s rear fender. Powered by a generator (not included), the Secula’s LED illuminates a ring around the reflector, which creates a diffuse light that is easier on the eye of cyclists following behind you, yet it’s no less visible from a distance. The standlight ensures that you remain visible when you stop. The light incorporates a reflector. It is not grounded against the fender, so you need to run two wires. Made in Germany. 2 year warranty.
The smallest and most compact dynamo powered taillight available, but don't be fooled by it's size, it meets all the requirements for brightness under the German road traffic regulations. The mounting holes are 50mm apart, just like most other Busch & Müller taillights. The single LED glows bright red, so don't be fooled by the clear lens. And the optics in the lens spreads the red light across the width of the lens, so the driver behind you sees a lot more than just a point source of light. This has a standlight, so it will stay lit for several minutes after you stop. This light should only be wired to a front 2.4 watt dynamo headlight.
This bracket allows you to convert your current single-hole rack to a mount capable of taking Busch & Muller's range of excellent tail lights.
This bracket mounts on to a 1-1/8th headset to provide mounting for any Busch & Muller Lumotec headlight.
This bracket allows you to attach your Busch & Muller taillight to the seat post binder bolt.
Page 1 of 1