416.979.9733 / UCYCLE@UCYCLE.COM


MON - FRI 10am - 7pm

SAT 11am - 7pm


ICE (Inspired Cycle Engineering)

ICE was established in 1998 by Chris Parker and Neil Selwood who share a passion for recumbent bikes and trikes and took the opportunity to acquire the rights to the original trike design and further develop the product.

ICE, Inspired Cycle Engineering design, build and construct recumbent trikes. Folding recumbent trike or tricycle models include the ICE Adventure folding recumbent trike and the ICE Sprint folding recumbent. ICE also construct the high-spec ICE VTX for experienced riders.

Trike Models

ICE (Inspired Cycle Engineering) Rear Suspension Elastomer

Fits all ICE suspension models from 2007 upwards. The red elastomer is rated 'Medium'. [more]

ICE (Inspired Cycle Engineering) 20" Rear Fender (Non-Suspension)

For older-style trikes without suspension. The ICE-specific stays on this rear fender will help… [more]

ICE (Inspired Cycle Engineering) 20" Fender (Suspension)

Keep water spray to a minimum with this ICE rear fender. This is the older style fender with three… [more]

ICE (Inspired Cycle Engineering) FB Seat Bracket

The FB bracket - moves the front seat mount backwards for very long legged riders. Note that using… [more]

ICE (Inspired Cycle Engineering) FF Seat Bracket

The FF bracket moves the front seat mount forward for very short legged riders, we recommend short… [more]

ICE (Inspired Cycle Engineering) Front 20" Fender Set

Keep yourself dry with the ICE Front Fender Set. Fits all 20" ICE Trikes from 2001 onwards. [more]

ICE (Inspired Cycle Engineering) 8mm Sealed Ball Joint

Replacement Sealed ball joints for pre 2010 ICE trikes. [more]

ICE (Inspired Cycle Engineering) Rear Suspension Rack (No Legs)

Made from 6061 aluminium, the geometry of the ICE rack has been developed to ensure that even a… [more]

ICE (Inspired Cycle Engineering) Quick Release Kit

The quick release kit is ideal for those who wish to easily remove mudguards, front wheels and… [more]

ICE (Inspired Cycle Engineering) Racer Side Bag

Fits Racer Hardshell seat. Pannier bags with no rack required. 25l capacity. [more]

ICE (Inspired Cycle Engineering) Derailleur Hanger

Rear derailleur hanger compatible with all ICE trike models from 2010 onwards. Note: If we are out… [more]

ICE (Inspired Cycle Engineering) Trike Bolt-On Axle

Replacement axles for ICE trikes. [more]

ICE (Inspired Cycle Engineering) Swing Arm Bushing Kit

Replacement bushings for ICE swing arm systems. [more]

  • General information

  • A: 280 College Street
  • Toronto, Ontario
  • Canada, M5TIR9
  • T: 416.979.9733
  • E: